How to bleed Rubber Brake Lines?

Rubber brake lines need to be safe. When you’re transporting passengers, it’s your responsibility to keep them safe, so it’s essential you make sure that your brakes are functioning efficiently.

If you had to slam on in an emergency, you need to know your brakes work. Rubber brake lines are designed to withstand extreme conditions, so when they fail, this can be quite a shock, to say the least. If you need to replace your rubber brake line hose, consider Brake Quip today!

How do brakes work?

The brake pedal is attached to a hydraulic cylinder and this forces brake fluid through the lines, this causes the brakes to engage. Once the brakes are engaged, friction will make the car slow down.

What happens when brakes fail?

Brake failure is a result of air entering the braking system. Air can easily get into the brake line when there’s a leakage in the system or if the brakes have been poorly maintained. The incorrect fluid level is another reason why brakes fail, leaving them to perform less reliably.

The brakes will feel soft and slack, you’ll be able to press the brake easily towards the floor- this is one way you can determine whether your brakes work. If you notice that your vehicle is taking longer to slow down, you may want to consider replacing the Rubber Brake Line Hose with one from Brake Quip.

How to remove air from automotive brake lines?

There are several ways you can bleed motorcycle brake lines and automotive brake lines. Here’s one way:

1. Forcing new brake fluid through the brake line and pushing air out.

The fluid reservoir needs to be full before you attempt to bleed the brakes. You’ll need to pump the brake several times until it feels firm.

Once the brake feels hard, hold pressure on it and open the bleeder valve. This will allow the old fluid to be pushed out- making room for the new brake fluid.

You should notice the brake pedal to push further towards the floor at this point. Before the pedal reaches the floor, the bleeder valve needs to be closed.

The process will then need to be repeated until there are no bubbles left in the system.

2. Removing air bubble and brake fluid.

Rubber brake lines can be used to draw brake fluid and to remove air bubbles, efficiently. Whether you need to bleed your Brake Quip automotive brake lines or your motorcycle brake lines, you can do so using a vacuum pump.

This process will also require a full fluid reservoir if you want to remove the existing brake fluid and air bubbles. Brake lines can be used to pull through the fluid that’s causing the fault and replace it with new fluid.

And finally…

Test your brakes before you start a journey, if they still feel spongy and slack, you should consider replacing the brake master cylinder.

The OEM Rubber Brake Line Hose from Brake Quip is ideal as it can perform exceedingly well under pressure. It also resists moisture and various weather conditions.

If you require any more information about bleeding brakes, don’t hesitate to get in touch with the team of experts at Brake Quip!

Call 01257220010 today!

Leave a Reply